- File or directory not found.

ACCESS CONTROL I encountered Error number: Check that the SQL server service is running. To solve the problem it is advisable to remove the AxTrax and reinstall the software with an empty database.

Now limited to AxTrax server, all system pop ups are now controlled separately based on Client and per Source:. AxTrax Software provides the ability to define separate Access Groups per user, create access groups based on your needs and then assign each user with the appropriate access group according to your defined access groups. The two LEDs are mode indicators showing whether the panel is set to operate as one or two readers per door.

Yes, we have an SDK package for the AxTrax software. In order to receive the SDK you need to contact your Rosslare representative and sign an NDA prior to the release of the SDK. The Door Ajar Delay feature defines the time that a door is allowed to be left open ajar before activating the defined Auxiliary Relay and or sending an alert to that effect.

Back tamper is the electronic signal that alerts to the fact that the controller has been tampered with and there was an attempt to remove it from the wall. Bypass code is the four digit code used to change the Mode of Operation of supported standalone controllers from Normal to Bypass Mode and vice versa.

Bypass mode is an operation mode that ignores normal access rights, access is not restricted to valid users only, and the door lock is released by anyone pressing the asterisk button. Direct Shunt is a setup definition in which an external input such as a door monitor is connected directly to the Auxiliary Relay allowing the Auxiliary Output to be activated after the defined direct shunt delay elapses.

The door bell is the alert activated and sounded when the door asterisk button is pressed on the unit. The door chime is the alert activated and sounded when the door is unlocked following a valid code entry. Fail Safe is the system setting that defines that in the event of a complete power loss due to a power outage for example, the door remains unlocked.

Fail Secure is the system setting that defines that in the event of a complete power loss due to a power outage for example, the door remains locked. Forced arm is the occurrence in which a door connected to the access control system has been physically opened without the approval of the access control system and without the system releasing the lock.

The maximum cable length while using RS communication is meters. Please note that the cable must be 2 pairs — twisted and shielded AWG. AxTraxNG and ViTrax are compatible with the following Operating Systems: Rosslare also provides an SDK for integration upon request.

For more information, please contact your Rosslare distributor. This product is match-on-card. Yes, please follow this quick guide to perform this update.

AxTraxNG uses different licensing. Please contact your Rosslare distributor for more details. ViTrax supports more than 50 brands. Here you can see the whole list of cameras. However, if you have already SQL installed, you will have to provide the login information for the SQL server.

First one is and last one is You can add up to 32 panels on the same network. It supports the following panels: AC, AC SPVACIP, AC, ACIP, AC MD-IO84, ACIP MD-IO84, AC MD-D02, ACIP MD-D02, AC, ACIP, AC MD-IO84, ACIP MD-IO84, AC MD-D02, ACIP MD-D02, AC, ACIP, AC MD-IO84, ACIP MD-IO84, AC MD-D04, ACIP MD-D04, ACIP.

It is not possible with that panel. You can easily configure a valid end date of a user in AxTraxNG and any of the panels it supports.

Doug-Hinds - Medical Information Technology Australia (Pty) Ltd | Medical Information Technology Australia (Pty) Ltd

You will then see the available fields to search for a user. You just need a Web browser that supports Flash in order to configure it. You can connect up to 32 End Units per EXP Main Unit. You can combine any type of EU EXP, EXP, and EXP The HomeLogix HLX Wireless Alarm Panel can be integrated and configured with AxTraxNG access control.

Then you can connect the Bio reader to Ethernet. You use it to enroll cards from your PC. MDB is Reader Programmer and it is used to set the Wiegand output format of MIFARE read-only readers, while setting the input control of the reader to either Buzzer or LED control. First, set the panel as 1 reader per door. Then go to panel properties and enable door interlock in selected doors.

First, be sure to set the panel is set as 2 readers per door. Then go to the panel properties and enable antipassback in the selected readers. Select the backup folder, quantity of days Ntime and database name.

AxTrax will perform an automatic backup very N days at the specified time. It can be used in 1: N mode or in 1: N mode, the unit identifies users according to their fingerprints only. You will need the MD wire RS to RS or the MDU wire RS to USB. Both are proprietary wires. You cannot build them on your own. Pin out specifications do not apply. Now, the controller address is set to 1. Second, set COM port in AS software: Third, to make the controller online: Now the download button is enabled.

If it still fails to enter Programming mode, go to b. Access the Expanse system by Web browser. Select the desired language. Assign the Name and Password to this operator. Log out of Expanse. Log in to Expanse with the new name and password.

Power on the EXP and wait for 2 minutes. Power off the EXP and set the DIP switch to its original settings.

Power on the EXP again. The power supply of AC can give a maximum current of 1. So, the current consumption of each door lock should be less than mA. If the customer is using a magnetic door lock, the customer has to be careful, because a magnetic door lock generally consumes current larger than mA. Under this condition, only 1 magnetic door lock is allowed. Just connect a reader to the Wiegand terminal of MD, and connect the RS of MD to the computer.

Yes, you need to connect door locks to Binary options demo account with alarms. The internal power supply is only enough for its modules, but not enough to drive door locks. Generally, AxTrax and AxTraxNG servers should be connected to panels all the time.

For AC, it should not be offline more than 3 days if more than events per day. For AC, it should not be offline more than 2 weeks. Check if the AYC controller left LED is green or red. If it is LED is red, then the hardware connection of AYC to PS-x25 is wrong. The encryption key in MIFARE cards cannot be recovered. The end user should make a copy of the key safely.

Delete the EXP in the Web browser and wait for Expanse to search for the EXP again. Connecting all RS cables in parallel will change cable impedance to unknown values. You will need an MD Serial Communications Adapter for AuraSys and HomeLogix or an MDU USB — Panel connector. Username or E-mail Password Remember Me. I encountered Function Error: Can multiple terminals be used to add users to the system simultaneously?

Yes, you can use multiple terminals to enroll users to the system. What is the Picture pop-up on AxTrax client option? Now limited to AxTrax server, all system pop ups are now controlled separately based on Client and per Source: Access Events — User information and Camera pop-ups — defined per Reader Camera Events — Camera Motion detection and Camera recording events — defined per Camera Alarm Events — defined per alarm link Return to Amber moneymaker. How can I find and utilize Multiple Access currency traders hold back from election bets architecture?

Does the AS support the new operating systems? What is the purpose of the binary options demo account with alarms green LEDs on the AC board located next to door relays? The two LEDs are mode indicators showing whether the panel is set to operate as one or two readers per door Return to Top.

Are there any SDK available upme group ltd forex the Moneymaker rope AS software? If we come up with any integration ideas, could we get a description of such an SDK to see what functions we can count with?

Binary Options Demo

What is the Ajar Delay feature? The Door Ajar Delay feature defines the time that a door is allowed to be left open ajar before activating the defined Auxiliary Relay and or sending an binary option broker with lowest deposit to that effect Return to Top.

What is the meaning of ASK found in many datasheets and manuals? What is Back Tamper? What is a Case Tamper? What is a Bypass Code? What binary options the minimum deposit in cents a Bypass Mode?

What is Code Assignment? What is a Direct Shunt? When would we use this feature? What is the Door Bell? What equity option strategies a Door Chime?

What is a Fail Safe? What is Fail Secure? What is Forced Door? What is the maximum cable length when using the RS protocol? Please note that the cable must be 2 pairs — twisted and shielded AWG Return to Top. Can I install AxTraxNG and ViTrax with a Windows server 64 bits? What is the default IP address of ExpansE? The default IP address of ExpansE is Which Operating Systems does AxTrax AS barclays stock broker demo Axtrax AS is compatible with Windows XP and Windows 7 32 bits only.

Yes, AxTraxNG platform can be integrated with the following third-party devices: How can I transfer fingerprint dow since obama re election to all of my AYC-W devices?

Can I use AY-B in fingerprint-only mode? Can I update the software from AxTrax AS to AxTraxNG? Yes, please follow this quick guide to perform this update Return to Top. Can I update the software form VeriTrax AS to AxTraxNG? I have a license for AxTrax AS Can I use it for AxTraxNG?

Which IP cameras are supported by ViTrax? Do I need to install an SQL server before AxTraxNG? What is the range of the AY-U reader? Does AxTraxNG support car parking module? Yes, AxTraxNG provides 2 methods of car parking management: Per parking — Set the maximum number of allowed user in the parking.

Free Binary Options Demo - No deposit!

The entry to the parking will be denied once this level is reached. Per Group — Set the maximum number of allowed user per group.

Entry to the parking will be denied once this level is reached. There is no limit to the maximum number of groups that can be added. Can the AYC-W Bio Reader work as a standalone controller? Yes it can, but you must use a Rosslare Intelligent Power Supply PS-x I would like to add more than one AC-panel on the same network.

What do I need to do? Which panels does AxTraxNG support? How can I search for a user in AxTraxNG? Can I use AC as a standalone controller without the use of any software?

How many users does ExpansE support? It supports up tousers per controller. Do I need any software to use ExpansE?

How many End Units can I connect per Main Unit? Does Rosslare integrate intrusion control products with access control? Which version of SQL does AxTrax support? With AxTraxNG you can use SQL or SQL With AxTrax AS you can only use SQL What are the requirements to install AxTraxNG?

Can I connect an AYC-W to a LAN network? What is the difference between MD and MDB? How can I set up door interlock in AxTraxNG? How can I set up a door antipassback in AxTraxNG? How can I make periodic backups with AxTraxNG? Which modes does the AYC-B Biometric Reader support?

Can I use AYC-B as a standalone controller? Yes, but you must use the Rosslare Intelligent Power Supply PS-x25 Return to Top. How many users does the AYC-B support?

How many users does the AYC-W support? Can I see an online ExpansE demo? How do I connect an AC panel to my PC with RS protocol? Can I design and print a user card using AxTraxNG? You can use our built-in cards designer, which comes with AxTraxNG. I failed to access SQL database when upgrading AxTrax to 0. Check if the AxTrax database is located here: How do I enroll a user in a standalone controller? Can we use HID cards with Rosslare Access Controllers?

I cannot connect to the AC controller from my PC during installation. I failed to find a panel in AxTraxNG, after changing the IP address and port number of panels.

Is BioTrax, Veritime, Vericard supported in AxTraxNG? How do I reset a standalone controller to its factory default settings? How do I enter Programming mode of a standalone controller if the default Master code fails?

Turn off the power of controller. Starting from power up, the whole programming procedure must be finished within 15 seconds. What is the maximum DC voltage connected to the relays of AC, AC, AC? The relays should not be connected to a voltage source higher than 30 VDC. How do I change the language in the Expanse system? English, Spanish, Chinese, Turkish, French, Japanese. How do I reset Expanse EXP to factory default settings? On Off On Off On Off On Off.

After reset, the IP address of EXP is reset to either How do I make my reader read the PIN code? How do I reset an AC, AC, AC panel? The only way is to download firmware to the panel again. No Return to Top. Can I connect 2 magnetic door locks to an AC panel? Can I enroll cards without using the panels AC, AC, AC? Do I need to use an external power supply for a door lock in ME for the Expanse system? Can I connect fingerprint readers, AY-x, AY-x, and AYC-W to AC? Yes Return to Top.

Why does my AYC convertible controller fail to work with a PS-x25 power supply? If I forget the encryption key for MIFARE cards, can we recover the lost key?

Can we use AxTrax or AxTraxNG to control panels through the Internet? For example, using my home computer to monitor the panels in offices from different sites? Close AxTrax or AxTraxNG first. Compress it and email to our technical support. How to change Expanse EXP from single door to double door? Can I connect the panels of AC, AC, AC RS bus in STAR configuration?

My country is using a dynamic IP address. Can I use AxTraxNG in WAN access? No, the AxTraxNG server cannot connect to panels with dynamic IP across internet. Can I run DigiTool software in Windows 7? DigiTool software only works in Windows XP. The support for other OSs is in our roadmap. If I lost the login password for DigiTool Lite GS, how can I recover it?

When trying to connect the HLX panel locally via the MD cable the panel does not response. How do I connect a Rosslare intrusion panel to my PC? I failed to install AuraSys Remote Programmer for P6 in Windows 7. If not, — Power off the panel. Connect a 12 VDC battery to the panel. Power on the panel. OR — Connect the panel to AuraSys software by MD You should use the XRA wireless expansion for this. Can the status of intrusion panels be remotely monitored?

If I lost the master code in AuraSys L4, L6, P6, and HomeLogix, can it be recovered? No, the panel has to be returned as RMA for re-programming. My HomeLogix panel has been running fine for some time, but recently gives false alarms. What is causing this? Replace the battery of the triggered sensor. In AuraSys software, go to a EXIT DELAY: What is the problem? Re-start power of the panel. Sitemap Privacy Policy Term of Use.